Offal Handling
Vertical Evisceration Conveyor
set driving unit & 1 set tensioning device (HDG frame); 9-tooth driving & driven sprockets. Frame: No.5 & No.14 channel steel, overall hot-dip galvanized, L≈13m. Track: L40×40×4 galvanized angle steel, double rail. Galvanized conveyor chain, pitch 80mm with pusher dogs, 1200mm spacing between pusher fingers. 2.2KW helical gear reducer.
Quote this equipment for your line
Size, configuration and drive are confirmed against your layout and required throughput.
Overview
set driving unit & 1 set tensioning device (HDG frame); 9-tooth driving & driven sprockets. Frame: No.5 & No.14 channel steel, overall hot-dip galvanized, L≈13m. Track: L40×40×4 galvanized angle steel, double rail. Galvanized conveyor chain, pitch 80mm with pusher dogs, 1200mm spacing between pusher fingers. 2.2KW helical gear reducer.
Features
- set driving unit & 1 set tensioning device (HDG frame)
- 9-tooth driving & driven sprockets. Frame: No.5 & No.14 channel steel, overall hot-dip galvanized, L≈13m. Track: L40×40×4 galvanized angle steel, double rail. Galvanized conveyor chain, pitch 80mm with pusher dogs, 1200mm spacing between pusher fingers. 2.2KW helical gear reducer.
Applications
- sheep processing lines
- Opening, Evisceration, Inspection & Trimming
Position in the process
Where this equipment sits in the line
Used in the Opening, Evisceration, Inspection & Trimming section of the line.
Related equipment
View all equipment
Offal Handling
Hand‑wash & Knife‑sanitizing Station
Floor‑mount stainless hand‑basin with knife‑sanitizing compartment; support‑column, splash‑guard, overflow‑pipe, foot‑operated valve; knife‑sanitizer with plastic knife‑rack & overflow‑pipe & manual‑valve; water‑supply & drain‑piping installation excluded
- Pig
Offal Handling
Triple‑compartment Hand‑sanitizing Sink
Pre‑room hand‑washing & sanitizing; stainless‑steel construction; three water‑faucets with foot‑valve
- Pig
Offal Handling
Floor White Offal Inspection Conveyor
Synchronous inspection & transport of white offal, running underneath carcass conveyor; white‑offal trays 550×100mm, 3‑mm stainless; anti‑tilt guide rods at evisceration station; VFD drive + pneumatic tension; stainless chain & 3‑mm stainless rail; motor 2.2kW IP55; tray pitch1000‑1200mm; support column 80×80×3 stainless square tube
- Pig
Planning a line that includes Vertical Evisceration Conveyor?
Send your throughput and layout notes. We will confirm configuration and the interfaces to neighbouring stages.